The influence of MWCNT and hybrid (MWCNT/nanoclay) fillers on performance of EPDM-CIIR blends in nuclear applications: Mechanical,hydrocarbon transport,and gamma-radiation aging characteristics

Blends of EPDM and chlorobutyl (CIIR) rubbers are used in nuclear plants where they have to withstand the combined effect of radiation and hydrocarbon aging. To improve their mechanical properties as well as hydrocarbon and gamma radiation resistance, the blends are reinforced with 0.5, 1, 1.5, and 2 phr of MWCNT. The increase in mechanical properties was highest for 1.5 phr MWCNT with 69% increase in tensile strength. The improvement in properties was correlated to MWCNT dispersion and filler–polymer interactions, which were confirmed by TEM and FTIR analysis. Hydrocarbon transport coefficients decreased on addition of MWCNT. The nanocomposites were exposed to 0.5, 1, and 2 MGy cumulative doses of gamma radiation. Depending on the radiation dose, crosslinking and/or chain scission occurred causes changes in physical properties. MWCNT reinforcement reduced the magnitude of changes in mechanical and transport properties after γ-irradiation. ESR and FTIR spectra provided qualitative information on free radical formation and chemical changes due to γ-rays exposure. To further enhance the properties, hybrid nanocomposites with 1.5 phr MWCNT and varying nanoclay contents (0.5, 1, 1.5, 2, and 5 phr) were prepared. Due to synergism between MWCNT and nanoclay, the hybrid composites had superior properties with hybrid containing 5 phr nanoclay giving 98% increase in tensile strength.     

Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Poly(lactic acid)/pulp fiber composites: The effect of fiber surface modification and hydrothermal aging on viscoelastic and strength properties

Poly(lactic acid) (PLA)/kraft pulp fiber (30 wt%) composites were prepared with and without a coupling agent (epoxidized linseed oil, ELO, 1.5 wt%) by injection molding. The non-annealed composite samples, along with lean PLA, were exposed to two hydro-thermal conditions: cyclic 50% RH/90% RH at 23 and 50°C, both up to 42 days. The aging effects were observed by size exclusion chromatography, differential scanning calorimetry, dynamic and tensile mechanical analysis, and fracture surface imaging. ELO temporarily accelerated the material's internal transition from viscous to an increasingly elastic response during the aging at 50°C. ELO also slowed down the tensile strength reduction of the composites at 50°C. These observations were explained with the hydrophobic ELO molecules' coupling and plasticizing effects at fiber/matrix interfaces. No effects were observed at 23°C.     

Evolution mechanism of the microstructure and mechanical properties of plasma-sprayed yttria-stabilized hafnia thermal barrier coating at 1400 °C

Yttria stabilized hafnia (Hf_0.84Y_0.16O_1.92, YSH16) coatings were sprayed by atmospheric plasma spraying (APS). The effects of thermal aging at 1400 °C on the microstructures, mechanical properties and thermal conductivity of the coatings were studied. The results show that the as-sprayed coating was composed of the cubic phase, and the nano-sized monoclinic (M) phase was precipitated in the annealed coating. The presence of M phase effectively constrained the sintering of the coating due to its superior sintering-resistance. The Young's modulus kept at a nearly same level of ~78 GPa even after annealing, and the coating annealed for 6 h yielded a maximum value of hardness but revealed a declining tendency in the Vicker's hardness with prolonged sintering time. The thermal conductivity increased from 0.8-0.95 W m^-1 K^-1 at as-sprayed state to 1.6 W m^-1 K^-1 after annealing at 1400 °C for 96 h. The dual-phase coating is promising to serve at temperatures above 1400 °C due to its excellent thermal stability and mechanical properties.     

快烧金属光泽结晶釉的研究

以钠长石、钨酸、氧化锰、氧化铜为原料成功制备了装饰效果良好的低温快烧金属光泽结晶釉。并通过控制变量的方法,研究了釉中各组分及不同工艺因素对釉面效果的影响。并通过XRD等测试手段分析了釉中晶相的组成,并初步分析了釉面呈现金属光泽的机理。     

Synergistic effects of modified TiO2/multifunctionalized graphene oxide nanosheets as functional hybrid nanofiller in enhancing the interface compatibility of PLA/starch nanocomposites

The aim of this study is to investigate the synergistic effects of modified TiO₂/multifunctionalized graphene oxide nanosheets at different ratios on the interface compatibility between starch and poly(lactic acid) (PLA). To this end, silanylated nano-TiO₂ (MTiO₂, 1 and 2%) and alkylated maleic anhydride grafted graphene oxide (f-GO, 0.1, 0.2, and 0.4%) at different combinations are blended with the PLA-starch composites using solution blending technique. Then, the synergistic effects of MTiO₂ and f-GO on PLA/starch matrix are investigated in terms of the morphology, crystallinity, structural characterization, thermal stability, dynamic mechanical, and antiaging properties, and the related mechanisms. The Raman and Fourier transform infrared spectroscopy spectra verify the successful synthesis of the two modified nanofillers (f-GO and MTiO₂) and the formation of strong hydrogen bond within the PLA-starch nanocomposites. Due to the strong interfacial interaction and the synergistic effect from the combination of 1% MTiO₂ and 0.2% f-GO, obvious improvement was observed in PLA-starch versus other nanocomposites in terms of morphology, thermal stability, surface hydrophobicity, storage modulus, ultraviolet-shielding capacity, and aging-resistance. Furthermore, differential scanning calorimeter (DSC), isothermal crystallization kinetic, and X-ray diffraction analysis demonstrate that f-GO and the M-TiO₂ significantly synergize in enhancing the crystallization rate and crystallinity of PLA/starch matrix. These results provide novel insights for constructing high-performance nanocomposites and facilitate their applications in food packaging.     

老旧煤矿健康老龄化环境建设路径分析

被关闭的低效率老旧煤矿,作为很多退休煤矿职工的家庭所在地,依然担负着为其提供正常生活条件和养老功能的任务。为了营造煤炭企业退休职工适老环境,对老旧煤矿健康老龄化环境建设路径进行了探讨。在分析健康老龄化的普遍性问题后,从公共服务、卫生健康服务、认同感、原有养老模式等方面论述了老旧煤矿存在的具体问题;针对现状及问题,从理顺养老服务管理机制和合理确定具体任务目标两方面提出了对策与建议。